We do have hitch fabrication parts for the 2016 Ford F-53 Chassis but there are no custom fit front mount receivers available at this time. You would need to a qualified fabricator to have a hitch welded on.
The Buyers Products black receiver tube part # 337RT25818B will get you started. I recommend this one because it has the hitch pin drilled for you already and it's already powder coated for you. I have attached a link for the other fabrication parts for your reference. view full answer...
For your 1992 GMC Vandura 3500 there is not a front mounted hitch from any of our manufacturers confirmed to fit. If you want to add a front hitch you will need to have one custom fabricated. I recommend using the Combo Bar 12" with 2" Trailer Hitch Receiver - Unpainted # E-11 to get you started and ensure it will be compatible with accessories.
I've linked the page to our hitch fabrication parts to assist. view full answer...
We do not at this time have a custom-fit gooseneck hitch for your 2018 Ford F-450 cab and chassis but we do have hitch fabrication parts like Curt # C65500 which has a rating up to 30K depending on the installation. This hitch does require under-bed reinforcement to reach its maximum capacity. view full answer...
The Buyers Products Hitch Plate with Receiver Tube - Dodge/RAM part # 3371809067 is designed for 2007+ models. The only option we have for the older models is the Buyers Products Fabricators Hitch Plates like part # 3371809040 which requires custom fabrication i.e. drilling and welding. view full answer...
A custom fit trailer hitch is not available for your 1968 Ford T-Bird. But you may be able to have a hitch custom made using some of the hitch fabrication parts that we carry. I have included a link to them for you.
A professional welder or fabricator could make a hitch that will fit. view full answer...
The Buyers Products Fabricators Hitch Plate part # 3371809027A is designed to work with pintle hooks that have a 1-3/4" x 3-3/8" wide bolt pattern like the Bolt-On Pintle Hook part # C48231. This is a standard pattern that most pintle hooks use so if you have a few already they should fit. view full answer...
For your 1999 Ford F-450 Cab and Chassis with aluminum flatbed you will either use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500 or the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch # 3375613500. The fabrication to your frame will need to be custom made. There is not a factory custom bracket already available for your truck from any of our manufacturers so they recommend making what you need from these parts on Cab and... view full answer...
There are no trailer hitches available for the 2008 Volvo C70. It might be possible for a professional welder or fabricator to make a hitch to your specifications using some of the hitch fabrication parts we have, linked to the right.
It sounds like you want to tow with the vehicle. Check the owners manual to see if towing is permitted. If you want the hitch for something like a bike rack or cargo carrier then there might be other options such as a trunk mount bike rack or roof rack. view full answer...
While your 2015 Mercedes-Benz CLS 550 does share the same chassis as the 2015 Mercedes-Benz E 350 the fascia is different. This will also mean parts behind the rear fascia are different and the same receiver will not be able fit both vehicles. As I do not see anyone manufacturing a receiver for your CLS you will need to visit a fabrication shop to see if they will be able to fabricate you a receiver. We carry the Weld-On 2" Receiver # E17 which can be used if they are able fabricate a receiver... view full answer...
The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on specific applications such as this but so long as you have the 34" frame spacing (outside to outside) which is standard then it should be able to be made compatible. If not, a better option would be the Buyers Products Fabricators Hitch Plate part # 3371809042 which is not limited to the above frame spacing... view full answer...
I don't have any specs to determine fit of the Buyers Products Fabricators Hitch Plate like part # 3371809040 on any one vehicle but you can make an educated guess using the overall dimensions of the plate which for the above are 34-5/8" wide x 15-5/8" tall. You'll need to weld the hitch in place so modifications are to be expected. view full answer...
As every 2019 Cadillac Escalade left the factory with a trailer hitch receiver no aftermarket companies fabricated a receiver for it. You will either need to find a factory receiver or we have the Curt Weld-On 2" Receiver for Custom Fabricated Hitches # E17. This will allow you to have a receiver fabricated to fit your Escalade. view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver # 65053 is confirmed to fit the 2015-2021 E-Series Cutaway E-450. As of July 2023, we have not had a chance to test this to confirm if it will fit the 2022 (your 2023 Conquest would be built on the 2022 model). Draw-Tite also does not list this as a fit, but they're further behind than we are since they only show it up through 2017. However, given the amount of other parts that carried over to the 2022, it is very likely it will work.
What... view full answer...
You may be able to have a receiver fabricated using the Weld-On 2" Receiver # E17 as I do not see anyone fabricates a custom fit receiver for your 2008 Audi A4 Quattro Wagon. You will want to contact a fabrication shop in your area and have them inspect your A4 to determine if there is enough structure to be able to fabricate a receiver.
If you are able to get a receiver fabricated I recommend installing the Tekonsha ZCI 4-Way # 119250KIT harness. This uses sensors which are placed around... view full answer...
I have a solution for you that will require some fabrication but I am sorry there are no custom fit front mount hitches for a 2018 Jeep Grand Cherokee Limited. You can use the Curt Weld-On 2" Receiver for Custom Fabricated Hitches item # E17 and have a welder fabricate you a crossbeam to attach to your Jeep's front frame. I have attached a diagram below of the dimensions. view full answer...
The Curt Solid Steel 2" Hitch Bar with Raw Finish - 20" Long # D34 is a solid bar used for fabrication of your own accessory for your hitch. This can be viewed as a shank for a custom cargo carrier, ball mount, or bike rack. It doesn't have the hollow receiver for an extension but you could fabricate it to do so.
If you are just looking to extend the trailer farther away from the vehicle, I recommend the Curt Extender for 2" Receivers -18" Long # C45796 as a similar length option. An... view full answer...
While the Draw-Tite Max-Frame Trailer Hitch Receiver # DT95MR will fit on a 2022 Ford Escape Hybrid it will not work on your PHEV. The PHEV is different from the standard hybrid and currently there is not a aftermarket receiver capable of fitting your Escape. As far as the "excluding Hybrid" and "Hybrid" for the vehicle fitment, this is just how the fit guide team determined would be the best way to show what vehicles it does and does not fit as some will not fit the hybrid and some will... view full answer...
While I do not see anyone manufacturing a receiver for your 2023 Hyundai Ioniq 6 you may be able to have a custom hitch fabricated at a local fabrication shop. We do have the Weld-On Receiver # E17 which will help aid in the fabrication of a receiver.
The Receiver # C98DR will only fit the Ioniq 5. view full answer...
The only option we have for a pintle hook plate that has D-rings attached for the 1997 Ford L8000 Dump truck is the fabrication plates like part # 3371809042 part # 3371809043 and part # 3371809040. These plates come with the D-rings to be welded on with additional gussets for strength. Then you would use Buyers Pintle Hook with Mounting Kit - Bolt On part # 33710042.
We do not currently carry anything that is truly adjustable for the dump truck unless you have a 2" hitch. Then you could... view full answer...
On the Kuat NV 2.0 2-Bike Platform Rack # NV22G for 2-inch hitches the distance from the center of the hitch pin hole in the shank to the rear-most part of the rack when it is in use is 33-inches. The rack has a height rise in its shank of 3-1/2-inches to help with ground clearance.
I presume that the hitch you're considering having fabricated will be on your vehicle, and NOT on a camper, trailer or motorhome. This is important since this excellent Kuat carrier is not rated for use on... view full answer...
Go To Results